(1)Body Smoothing Hammer with a 0.401 shank fits most standard Air Hammers. Black oxide finish hardened steel with a 1.5" Diameter convex face. Works great alone for roughing out a panel or smoothing with a back-up dolly. Made in USA.
Air Hammer is not included.
(1)Designed to be used with the Stud Welder System, this tool makes it easy to repair minor dings and dents, due to hail, parking lots, etc. Just weld a draw-pin (stud) to the surface, attach the tool to the pin, slowly squeeze the handles until the dent is flush with the surface, then snip-off the draw pin.
For best results, use on clean, flat surfaces with smooth finish. Objects with textured, brushed or satin finishes or surface variations degrade the air-tightness of vacuum seal reducing lift capacity. Pulling/lifting at angle other-than 90-degrees from surface also affects performance. In our tests, the cups were placed on flat 18-ga sheet metal with semi-gloss finish and lift was applied at 90-degrees until cups broke free - consistently requiring more than 75 lbs of lift. Coating cup-rim lightly with small amount of vegetable/petroleum oil may improve seal quality on some surfaces.
T&E; 1882 Pneumatic Dent Puller W 3 Cups 1882 T&E Tools Pneumatic Dent Puller. The pneumatic dent puller has 3lb.(1.36kg) slide hammer and is fitted with a brass shut off valve. It is supplied with three different size screw on suction pads. Simply select the correct size pad to remove the dent, apply shop air and use the slide hammer. Compressed air is exhausted through the handle and unit is fitted with 13"(330mm) inlet hose with 1/4"NPT air plug. Slide Hammer Length: 24"(600mm) Pad Sizes: 1: 60mm Screw On Suction Pad 2: 120mm Screw On Suction Pad 3: 150mm Screw On Suction Pad
(12)
For best results, use on clean, flat surfaces with smooth finish. Objects with textured, brushed or satin finishes or surface variations degrade the air-tightness of vacuum seal reducing lift capacity. Pulling/lifting at angle other-than 90-degrees from surface also affects performance. In our tests, the cups were placed on flat 18-ga sheet metal with semi-gloss finish and lift was applied at 90-degrees until cups broke free - consistently requiring more than 50 lbs of lift. Coating cup-rim lightly with small amount of vegetable/petroleum oil may improve seal quality on some surfaces.
(104)DO-IT YOURSELF! DENT AND DING REPAIR KIT Featuring unique patent-pending bridge and adhesive system designs. Its the one professionals use! It|s simple to use, just three easy steps and Pops-A-Dent removes dents from hail, other car doors, and more ... without damaging the surface of your car! Pops-A-Dent saves you money and is the economical alternative to costly dent professionals.
For a video demo go to www.denthammer.com If you've been shopping for a glue puller, you've come to the right place. Slide hammer glue pullers are the best on the market. They provide much more control in your pulls than twist or handle pullers. It's very difficult to do small consecutive pulls with other types of pullers. Slide hammers give you the ability to do quick little pulls while watching your progress. You can take your time with the pulling process rather doing abrubt quick pulls that the other types of glue pullers offer. These glue pullers work great for pulling out small, medium and large size dents.Warning-any glue puller that rests on the vehicle panel can put new dents in the vehicle. Slide hammers won't put you at risk of adding new dents. This slide hammer comes with 6 glue pulling tabs ranging from 1/2" to 1-1/4" diameter. Also included is a glue gun, nylon knock down for tapping down high spots and 6 extra strength black glue sticks and glue release solution. User instructions included. (Fits most standard pulling tabs if you would like to ad to your tab styles) Glue pullers are a great asset to the dent repair newcomer and the experienced tech. Glue pullers can help you when the car panel can't be accessed using metal rods or to give you a head start on larger dents. Please NOte: glue puller kits will not work on every type of dent. Very rigid areas of the car panel, body lines and deep dents are not suitable for glue pullers. Works best on pliable metal like hoods and center of door panels
(1)seen on tv
(6)Strong reinforced Nylon lever with pivoting base and self-locking stud capture mechanism allows the technician to quickly lock and lever studs while also compressing the crown area of the dent with the pivoting base. Adjustable pivot base on the Stud Lever allows one-handed operation and provides increased leverage, accuracy and reach for the pull and crown compression processes both vertical and horizontal, including roofs and lower rocker panels. Stud Lever’s unique stud capture mechanism allows technician to quickly and easily capture both 2.2mm and 2.6mm studs as close as 3/8 inches apart. Included with the Stud Lever is the Steck Straight Edge, part number 20003, which allows the technician to align the stud pull with the non-damaged metal area for accurate pulls on the initial pull which minimizes metal work and reduces the need for slide hammers.
(3)Paintless dent repair (PDR) glue for use with glue gun in the Keco Super Tab Dent Pulling kit - ASN B003O9ISA8 SPECIAL OFFER: With each order receive a FREE variety pack of (3) KECO glue tabs-Retail value $5.55 (as of 01/07/2013 09:52 PST)- (one per customer per invoice)
(11)
Heavy-duty 1/4" thick rubber and individual vacuum lever for sure grip when it matters. Rugged impact-resistant ABS construction. For best results, use on smooth non-porous surface; both surface and rubber cup should be clean and free from dirt. Apply pressure to handle against surface while lifting levers; lubricating cup rim with small amount of rubber preservative or other liquid typically enhances rubber-to-surface seal and helps improve vacuum strength. Applying excessive lubrication may allow undesired cup movement on surface.
(18)The Original Dent Doctor The Original Dent-Doctor, Do-It Yourself Dent and Ding Repair Kit is simple to use, just three easy steps and Dent-Doctor removes dents from hail, other car doors, and more ... without damaging the surface of your car! Dent-Doctor saves you money and is the economical alternative to costly dent professionals. No more waiting days at the body shop. Includes everything you need to get professional results. Fixes dents and dings with a unique bridge and adhesive system. Developed and utilized by professional auto-body experts. Unique arched bridge design eliminates the chance for additional damage. (Other systems without our arched bridge design are known to actually add dents to a car!) Patent-pending adhesive system design guarantees dent removal without the messy, sticky residue other systems are known to leave behind. Repairs dents in almost any place on any vehicle. Features: Do it yourself repair kit- quickly repairs dings and dents on cars and trucks No sticky, messy residue simply stick, twist, and the ding is gone Saves money Unique bridge and adhesive system No more waiting days at the body shop No more costly bills Includes: Dent removal bridge 3 x Different sized Dent removal stems Glue gun with 7 inch glue stick Knock down tool
The Klutch 21 1/4in. steel dent puller has a 3-lb. sliding hammer, 13in. inlet hose and brass shutoff valve. Through-handle exhaust directs exhaust safely away from user. Includes: 1/4 in. Air plug, Pads Included (qty.): (3) Includes 3in., 4in., 6 in. pads, Common Usage: Pneumatic dent puller, Hammer Weight (lbs.): 3-lb. Sliding hammer, Single, Pair, or Set: Single
