PT# -111-036 PT# # 111-036- Pick-A-Dent 36/Pk by, Denticator [Health and Beauty]
by Denticator
New!: $22.20 (as of 01/31/2013 14:35 PST)
Dent Removal Tools
- Rank: #191939 in Health and Beauty
Body Smoothing Hammer with a 0.401 shank fits most standard Air Hammers. Black oxide finish hardened steel with a 1.5" Diameter convex face. Works great alone for roughing out a panel or smoothing with a back-up dolly. Made in USA.
Air Hammer is not included.
Designed to be used with the Stud Welder System, this tool makes it easy to repair minor dings and dents, due to hail, parking lots, etc. Just weld a draw-pin (stud) to the surface, attach the tool to the pin, slowly squeeze the handles until the dent is flush with the surface, then snip-off the draw pin.
Wilmar W1028 Suction Cup Dent Puller
New Double Head Suction Cup! Size: 4-1/2" x 2 Capacity: ~100 Kg Suction Cup For Cars or Trucks Also used to carry the heavy things (Windows, Mirrors, Door, Etc... Tighten and "clips" the 2 handles to create suction and produce this exceptional suction cup strength. Note: The picture shows 2 views of one item. This auction wins you one item (two heads connected with one handle).
OTC 8mm Stud Remover offer the best professional extractors available. It is designed and tested to reach studs in difficult work areas.
Amazing amount of holding/pulling power in an easy-to-handle size that will fit applications too tight for regular-size cups. Rugged impact-resistant ABS construction. For best results, use on smooth non-porous surface; both surface and rubber cup should be clean and free from dirt. Apply pressure to handle against surface while lifting levers; lubricating cup rim with small amount of rubber preservative or other liquid typically enhances rubber-to-surface seal and helps improve vacuum strength. Applying excessive lubrication may allow undesired cup movement on surface.
The largest selling and most economical body shop dent puller in the industry. The 3 lb. slide weight is mounted on 1/2" plated steel shaft. Famous blue vinyl hand grip over steel handle reduces sting on technicians hands and provides 100 percent grip. There's no sacrifice, comfort, quality and durability!
For best results, use on clean, flat surfaces with smooth finish. Objects with textured, brushed or satin finishes or surface variations degrade the air-tightness of vacuum seal reducing lift capacity. Pulling/lifting at angle other-than 90-degrees from surface also affects performance. In our tests, the cups were placed on flat 18-ga sheet metal with semi-gloss finish and lift was applied at 90-degrees until cups broke free - consistently requiring more than 75 lbs of lift. Coating cup-rim lightly with small amount of vegetable/petroleum oil may improve seal quality on some surfaces.
1882 T&E Tools Pneumatic Dent Puller. The pneumatic dent puller has 3lb.(1.36kg) slide hammer and is fitted with a brass shut off valve. It is supplied with three different size screw on suction pads. Simply select the correct size pad to remove the dent, apply shop air and use the slide hammer. Compressed air is exhausted through the handle and unit is fitted with 13"(330mm) inlet hose with 1/4"NPT air plug. Slide Hammer Length: 24"(600mm) Pad Sizes: 1: 60mm Screw On Suction Pad 2: 120mm Screw On Suction Pad 3: 150mm Screw On Suction Pad
Made of plastic material, flexible and tough, smooth and elastic, protects car's parts. Refit your car stereo in short time, avoids causing any damnification to your car stereo. Suitable for most of vehicles.
Eastwood MIG Welder Stud Weld Welding Kit with Dent Puller Slide Hammer
The Eastwood MIG Stud Welding Kit transforms your MIG welder into a Stud Welder which can be used to repair and remove dents from sheet metal. This kit includes everything you will need to start repairing dents with your MIG welder. The nozzle included in this kit was designed to work with Tweco style nozzles and may or may not work with other style MIG torches. Mig Welder is not included.
Repairs most minor dents up to 3" across. For use on original OEM factory painted surfaces only.
Bondo Locking Suction Cup Dent Puller has 300 times more suction than other non-locking suction cup dent pullers. It can pull out large dents without leaving holes behind that need to be filled.
Skin on - Skin off! We've revolutionized putting it on! Now, be prepared to be amazed at how fast it will come off! Operator can choose among the various angles. The maneuverability of the secondary handle can add stability to help keep the tool oriented.
This reflector board comes complete with goose neck and suction cup. It produces a fogged reflection for superior finishing during mobile applications. Ideal for working in outside conditions without power
This great set includes: Bumping Hammer Picking Hammer Body Hammer Heel Dolly Universal Dolly Combination Dolly Spoon Dolly
For best results, use on clean, flat surfaces with smooth finish. Objects with textured, brushed or satin finishes or surface variations degrade the air-tightness of vacuum seal reducing lift capacity. Pulling/lifting at angle other-than 90-degrees from surface also affects performance. In our tests, the cups were placed on flat 18-ga sheet metal with semi-gloss finish and lift was applied at 90-degrees until cups broke free - consistently requiring more than 50 lbs of lift. Coating cup-rim lightly with small amount of vegetable/petroleum oil may improve seal quality on some surfaces.
This easy to use, inexpensive Glue Puller Kit allows for simple, cost efficient removal of small to medium dents/dings on all panels of your vehicle. More and more, light gauge sheet metal is being used in the construction of vehicles. You can actually dent many new cars by simply leaning against them. Dent Out Glue puller kits allow the do-it-your-selfers, a professional option to expensive dent removal services. No need to access the underside of the panel. Each unique kit offers a tool for specific damage. With three kits available, they encompass all types of dent repair. Simply apply a bead of glue to the pulling nib and affix the nib to the lowest area of the dent. The tool slips over the threaded stud. A wing nut tool is threaded down pulling the metal up. Once the dent is pulled out, a couple of drops of release agent is applied to the glue and the pulling nib comes right off. Use only on OEM baked finishes. This product will not damage your factory finish.